HỢP TÁC BỀN LÂU
CÙNG NHAU PHÁT TRIỂN
Hotline
0916 213 311
| Application: | Suitable for precise cutting, mass production part machining, with super cutting performance and efficiency in steel and aluminum. |
| Specifications | |
| Travel | X axis travel: 1300 mm |
| Y Travel: 750 mm | |
| Z Travel: 700 mm | |
| Distance | Spindle center to column: 770 mm |
| Spindle nose to table surface: 130-830 mm | |
| Worktable | Worktable area: 1450x700 mm |
| Dimension of T slot: 5-18x152 mm | |
| Max worktable load: 1000 kg | |
| Spindle | Spindle speed: 12000 rpm |
| Spindle type: BBT40 | |
| Spindle motor: 15 kW | |
| Axial | X/Y/Z rapid feed: 36/36/36 m/min |
| Axis acceleration: 1.0 g | |
| X/Y/Z axis feed motor: 3.0/3.0/3.0 kW | |
| Tools | Max tool length: 300 mm |
| Max tool weight: 7 kg | |
| Tool magazine capacity: 24 | |
| Max tool (full): 80 mm | |
| Max tool diameter (without adjacent tools): 150 mm | |
| Tool change time: 1.75 s | |
| Accuracy (ISO230-2) |
Positioning accuracy: ±0.003/300 mm |
| Repeated accuracy: ±0.002/300 mm | |
| Machine | Power requirement: 25 KVA |
| Min/max air pressure: 5-7 kg/cm2 | |
| Coolant tank capacity: 510 lít | |
| Controller: Fanuc or Mitsubishi | |
| Floor space requirement: 4220x3300 mm | |
| Machine height: 3390 mm | |
| Machine weight: 8000 kg | |
| Standard Accessories | Fanuc Oi-MF (10.4") controller or Mitsubishi M80B (10.4") controller |
| Full enclosed cover | |
| 24T tool magazine | |
| Spindle oil cooler | |
| Working LED light | |
| Arlam LED light | |
| Heat exchanger for electrical cabinet | |
| Bottom guarding flushing system | |
| Central lubrication system | |
| Auto power off, Safe switch | |
| Rigid tapping | |
| MPG | |
| Basic installation sets | |
| Leveling pads | |
| Air gun | |
| High pressure water gun |
| Optional Accessories | Fanuc Oi-MF (15") controller or Mitsubishi M80B (15") controller |
| 30T tool magazine | |
| Air conditioner for electric cabinet | |
| Auto door | |
| Oil mist collector | |
| 20KG/30KG CTS | |
| Dual screw chip conveyor (front drawer type) | |
| Dual screw + chain type chip conveyor (left out) | |
| Tool setter (for tool length) | |
| Tool setter (for tool length & radius) | |
| Laser tool setter | |
| Auto part measuring | |
| 4th axis rotary table (MAX ø320) | |
| 5th axis rotary table (MAX ø320) |