HỢP TÁC BỀN LÂU
CÙNG NHAU PHÁT TRIỂN
Hotline
0916 213 311
Graphic Conversational Program Functions:
- OD Grinding / End Face Grinding / Form Grinding
- Form Dressing w/ Auto Compensation
- Multiple Section Grinding Sequences
- Setup Parameter Storage
- Graphic Parameter Instruction
| Grinding Capacity | Swing over table | Ø500 mm |
| Distance between centers | 3000 mm | |
| Max. grinding diameter | Ø480 mm | |
| Max. grinding length - dresser on workhead side | 1850 mm | |
| Max. grinding length - dresser on tailstock side (Opt.) | 2000 mm | |
| Max. load held between center | 250 kg | |
| Center distance between spindle & slide table | 255 mm | |
| Grinding Wheel | Infeed angle | 60º |
| Diameter x Width x Bore | Ø510x50-100xØ152.4(6") Opt.Ø610x50～100xØ203.2(8") mm |
|
| Motor rated power / max. torque | 7.5kw/49Nm (Opt.11Kw/ 71Nm) |
|
| Wheel speed | 1250 (Opt.1650) rpm | |
| Workhead | Max. manual swiveling angle | 90º |
| Spindle speed (infinite variable) | 10～600 rpm (có thể thay đổi) | |
| Motor rated power / max. torque | 1.5 kw | |
| Center taper | MT4 (Opt. MT5) | |
| Center working | Fixed or Rotary | |
| Diameter of bore | Ø26 mm | |
| Tailstock | Tailstock quill travel | 25 mm (Opt.50/75) |
| Cente taper | MT4 (Opt. MT5) | |
| X axis | Travel | 280 mm |
| Max. rapid feedrate | 6 m/min | |
| Heidenhain linear scale resolution | 0.05 um | |
| Min. increment | 0.0001 mm | |
| Servo motor rated power | 1.8(F)/2.2(M) kw | |
| Z axis | Travel | 3450 mm |
| Swiveling angle | ±2º | |
| Max. rapid feedrate | 10 m/min | |
| Min. increment | 0.0001 mm | |
| Servo motor rated power | 2.5(F)/3.5(M) kw | |
| Motor | Hydraulic motor | 0.38 kw |
| Hydrodynamic GW spindle lubrication pump | 0.2 kw | |
| Guide way lubrication pump | 0.2 kw | |
| Coolant pump | 0.2 kw | |
| Machine | Net Weight (semi-enclosed splash guard) | 6700 kg |